Product Guide
How to Identify Compressor Parts
The information that gets you the right part the first time.
1. Start with the nameplate
Every compressor has a nameplate or data label. Photograph it clearly, straight on, in good light. The most important fields are:
- Model / type designation — the full code, including suffixes.
- Serial number — helps identify production variants.
- Electrical data — voltage, phase, frequency and current.
- Refrigerant and oil — where shown.
2. Find the part number
Original parts often carry a part number stamped or printed on them. Manufacturer spare-parts lists for the compressor series also show part numbers against exploded diagrams. If you have the old part, photograph any markings on it.
3. Measure if needed
For parts such as piston rings, gaskets and seals, dimensions help confirm a match: bore diameter, ring width, shaft diameter or gasket pattern.
4. Describe the job
Tell us whether it’s a single part replacement or a full overhaul. A valve plate replacement, for example, also needs the matching gaskets.
Common compressor parts
| Part | Typical symptom when worn or failed |
|---|---|
| Valve plate / reeds | Low capacity, high discharge temperature, poor pump-down |
| Piston rings | Low capacity, high oil carry-over |
| Bearings | Noise, low oil pressure, high current |
| Oil pump | Oil pressure failure trips |
| Shaft seal | Oil or refrigerant leak at the shaft (open-drive) |
| Gaskets | Leaks at joints after opening |
| Terminal plate | Leaks or electrical faults at the terminals |
Send it to us
Brand, model, part number and photos — that’s all we need. See compressor parts.
Related Products
Products for this guide
Compressor Parts
DARKICK compressor parts for multiple series: valve plate kits, oil pumps, connecting rods, gaskets and service valves.
Compressors
Scroll, semi-hermetic, hermetic, reciprocating and screw compressors for AC and refrigeration systems.
SKF Bearings
SKF bearings for HVAC, refrigeration, industrial and mechanical applications.
Refrigeration Parts
Expansion valves, solenoid valves, filter driers, sight glasses, pressure controls and line components.