HVAC Guide
HVAC & Refrigeration Compressor Guide
How the main compressor types differ, where each is used, and what to check before ordering a replacement.
Compressor construction: hermetic, semi-hermetic and open
Compressors are first classified by how the motor and compression mechanism are enclosed.
- Hermetic — motor and compressor sealed in a welded shell. Compact and leak-tight, but not repairable. Typical in residential and light commercial equipment.
- Semi-hermetic — motor and compressor in a bolted housing that can be opened. Serviceable and rebuildable; standard in commercial and industrial refrigeration.
- Open-drive — compressor driven by an external motor through a shaft and coupling, with a shaft seal. Used in large industrial and ammonia plants.
Compression technologies
| Type | How it works | Typical use |
|---|---|---|
| Scroll | One orbiting scroll against a fixed scroll | AC, heat pumps, VRF, small chillers, medium-temp refrigeration |
| Reciprocating | Pistons in cylinders with suction/discharge valves | Commercial refrigeration, cold rooms, low-temp duty |
| Screw | Two meshing rotors compress gas continuously | Chillers, industrial refrigeration, process cooling |
| Rotary | Rolling piston in a cylinder | Small split AC and appliances |
| Centrifugal | High-speed impeller | Large chillers in central plants |
Choosing a replacement compressor
The safest replacement is the same model. When that model is obsolete, a replacement should match:
- Refrigerant and approved oil type
- Application envelope (high, medium or low evaporating temperature)
- Capacity at your operating conditions — not only at rating conditions
- Electrical supply: voltage, phase and frequency, and starting method
- Physical fit: mounting, suction and discharge connections
In the UAE, condensing temperatures in summer are high, so check that the replacement operates within its envelope at peak ambient.
After a compressor failure
Find the cause before fitting a new compressor. Common causes include liquid floodback, loss of oil, overheating from high condensing pressure, electrical faults and contamination. After a motor burnout, test the oil for acid, replace filter driers and clean the system as required.
Need a compressor identified or quoted?
Send the nameplate photo and we’ll help. Browse compressors or compressor parts.
Related Products
Products for this guide
Compressors
Scroll, semi-hermetic, hermetic, reciprocating and screw compressors for AC and refrigeration systems.
Compressor Parts
DARKICK compressor parts for multiple series: valve plate kits, oil pumps, connecting rods, gaskets and service valves.
Refrigeration Oils
POE, PVE, mineral and alkylbenzene compressor oils matched to refrigerant and compressor.
SKF Bearings
SKF bearings for HVAC, refrigeration, industrial and mechanical applications.